CORE MACHINERY & ENERGY
E-mail: sales@cmecn.com
English
-
English
OH1（OH-F/C） Single Stage Overhung Pump
CME OH Series API 610 Pumps
- OH-F is horizontal overhung process pump with followingcharacteristics: end suction, top discharge, single stage, radialsplit, foot mounted,etc. API Code is OH1, suitable for clean, lightcontaminated, neutral or corrosive liquid.
- OH-C is horizontal overhung pump with following characteristicsis:end suction. top discharge, single stage, radial split, centerlinemounted process, etc. API Code is OH2. Suitable for clean, lightcontaminated, neutral, corrosive, lower or high temperature liquid.
- Applicable Codes and Standards: API610(ISO 13709) 10th / 11th /12th Edition
- Flow rate Q: up to 2400 m³ /h
- Head H: up to 250 m
- Pressure P: up to 10 MPa
- Temperature T: -80 ~ +450℃
Overview
Performance range
- Parameters
- OH-F is horizontal overhung process pump with followingcharacteristics: end suction, top discharge, single stage, radialsplit, foot mounted,etc. API Code is OH1, suitable for clean, lightcontaminated, neutral or corrosive liquid.
- OH-C is horizontal overhung pump with following characteristicsis:end suction. top discharge, single stage, radial split, centerlinemounted process, etc. API Code is OH2. Suitable for clean, lightcontaminated, neutral, corrosive, lower or high temperature liquid.
- Applicable Codes and Standards: API610(ISO 13709) 10th / 11th /12th Edition
- Flow rate Q: up to 2400 m³ /h
- Head H: up to 250 m
- Pressure P: up to 10 MPa
- Temperature T: -80 ~ +450℃
Overview
Performance range
Scope of application
OH-F/C is mainly used in oil refineries, petrochemical industry, coalprocessing industry, low temperature engineering, environmentalprotection engineering, and can also be used in water supplyplants, seawater desalination plants, power plants, chemicalindustry, paper making, pulp industry, sugar industry, etc.
Product features
- Throat bushing, cooling or heating jacketstructure will be available for casing cover, sealchamber design meets the provisions of latestedition of API682 Code
- Heavy duty design shaft guarantee theminimizing deflection and improve the servicelife of mechanical seal and bearings.
- Impeller can be closed, semi-open or opentype with SPL locknut for different liquidconditions.
- SKF Radial bearing + Groove ball thrust bearing
- Wear ring is fixed on casing by rivet screw, andconvenient for replacement of spares. Wearring clearance meets API610 code.
- Vibration, temperature monitoring instrumentsinterfaces will be available on bearing housing,standard lubrication is oil bath, oil mistlubrication or purging oil mist lubrication willalso be configured
- Foot mounted or centerline mounted structurewill be available for casing, nozzles loads meetsAPI610 Code.
Copy product links
Long by picture save/share
INQUIRY
Add Successfully
— Product Center —
Discover more high-quality products for your one-stop procurement.
点击右上角
分享给朋友吧
Contact Us
+86 182 2980 0688
sales@cmecn.com
No. 249 Section 2, Furong South Road, Tianxin District, Changsha, Hunan, China
24/7 Technical Support & Service
Copyright © 2025-2028 CME Fluid System Solutions All rights reserved.
WhatsApp
E-mail
